If you mainly have hard floor coverings in your house, you probably want to keep it flawless and flawless with one of the best vacuum cleaners, wet and dry vakes or your conventional MOP tools.
And although it may seem like child's play to know how to clean hardwood floors, they could make some serious mistakes. According to experts, there are common mistakes that we tend to either make the task counterproductive or in the worst case to ruin their floors as a whole.
So if you want to avoid damage or expensive repairs, the most important mistakes that you can avoid when cleaning your floors and experts are.
1. Do not absorb large rubble before the vacuuming eye
Even with the most powerful vacuum cleaners, it cannot be ready to absorb large pieces of rubble. From small pebbles and renovations to Pet kibble, you should always look for them with a dust pan and a burst set first.
If not, these hard deposits may be able to clog the filters or damage the mechanism of their soil cleaner over time.
The same applies to combating sharp debris such as broken glass. It is advisable to carefully record large pieces by hand and use a dust breakdown and sweep all the remaining tiny pieces. And never use your vacuum cleaner to suck them.
2. Use the wrong cleaning products
Just because it promises flawless floors on the bottle of flawless floors does not mean that it is the right cleaning solution for your soil type.
“Every floors are different and therefore requires a different cleaning process and product,” advises Liam Cleverdon, Flooring expert at Flooring King. “This means that a product that is designed for hardwood may not be efficient for laminate – but it can also strip surfaces of your protection closures, which increases the risk of future damage and potential replacement costs. As a result, I would suggest that proper research to ensure that the selected cleaning product is designed for the soil to avoid products that can cause damage or discoloration. “
Never use a damp and dry vacuum cleaner on unfinished floor. Essentially, unfinished wooden floors are a surface that was not coated with a protective seal. If the wood stays untreated, it slightly absorbs the water or moisture from the wet and dry vacuum. This can lead to the soil for warp or even split over time. Experts suggest that they simply clean such floors with natural oils and wax.
3. Ignore sponsorships
How often have we missed a villain pollution on the floor or forgot to clean it immediately? Well, this is a common mistake we tend. Experts say that a spill could ruin our ground surfaces for too long.
“Depending on the liquid, it can be proven to be incredibly problematic and impair the appearance of the soil,” says Cleverdon. “Wine, water and bubble drinks can potentially ruin surfaces and cause floors to stick sticky, discolored and potentially warp. It is also so avoidable that all people have to do to avoid addressing them immediately. Usually they can be removed with a microfiber cloth. “
Besides, do you know? TIt justifies why microfiber cloths are available in different colors? And here are 7 ways of how a microfiber cloth can be used in the house – they will be surprised.
4. Leave moist floors air dry after wiping
We all made it guilty of letting our damp soil air after wiping. It's the easiest way to dry, right? Apparently we were all wrong! Surprisingly, experts say that this is no and that we could actually ruin our soils.
“Many people do not know that air -drying soils can represent a risk similar to burial absorption and warp,” adds Cleverson. “Although it is definitely the simplest method of drying moped floors, it is better to put the time aside with microfiber cloths with dry surfaces. It helps to prevent stripes and the risk of moisture between planks.”
5. Extract too much pressure on surfaces
Although we think the more pressure we exert, the more effective our cleaning staff will remove stubborn markings, but this is a fixed no. Regardless of whether you wipe or use a wet and dry vacuum, always with care.
“It is incredibly common for people to be torn along while they aim at a annoying spot and become too rough with the surface,” Cleverdon agrees. “The scrubbing of floors too hard can remove protective coatings while leaving visible scratch marks and increasing the visual chaos. This is particularly widespread in households with wood, vinyl or laminate floors. It is therefore crucial to maintain healthy clean soils to walk stains and spills without being too hard.
“Overall, I believe that it is incredibly important that people are aware of the most common mistakes when cleaning the floors. In this way, people can avoid these mistakes themselves, reduce the risk of permanent damage and enable people to maintain proper and inviting aesthetics. “
If you have unsightly scratches, repair scratched wooden floors so that they look like new.